![]() Touted as one of the premier designer of architectural hardware in the world, Manzoni cabinet pulls are designed and manufactured by the world's leading craftsmen. That is what sets their cabinet pull designs apart from others in the industry. Manzoni knows the importance of design even in the smallest detail when satisfying the needs of even the most discerning client. No detail should be overlooked when it comes to creating the perfect space. Don't forget one of the most important details of the project, choosing the kind of pull that sets the stage for establishing the perfect feel for the entire room. Once you feel it starting to tighten up, stop there.įor the freezer, you just repeat the same steps of epoxying on a washer + screw and then screwing on the pull and epoxying the other side in place! It sounds a million times more complicated than it is! The trick really is to letting the epoxy set up 100%.You have labored over your choice for just the right cabinet in your kitchen or bath. It should hold right from the get-go, but if you want some extra security you can use a few pieces of duct tape to hold the pull in place while the epoxy sets overnight. We used this super heavy duty epoxy to glue the washer and the screw to the fridge where we wanted the top of the pull to sit.Īfter letting the epoxied washer + screw set up overnight, I twisted on the IKEA pull with the other washer and screw already screwed in flush and then epoxied that loose end in place. We tested out a bunch of gold spray paints (stay tuned for a post on that sometime soon!) to see what would look right for the space and this one was the perfect color and finish for our handles. Pro tip – take the screws that come with your handles to the hardware store with you to ensure you get the right fit and length – you’ll need metric sized screws with the IKEA pulls! Make sure that your screws fit flush into whatever pull you choose for this project. ![]() You will also need four washers and four short flat top machine screws for this project. IKEA came to the rescue with these pulls (we also used them on our cabinets!). I really wanted big brass pulls but I also wanted to keep this fridge as budget friendly as possible. We used a foam roller to apply the paint, letting it dry between coats. We ended up trying a coat of this chalk paint over the enamel and the finish was perfect! Smooth and completely matte – exactly what we had in mind. We first painted the fridge with an enamel paint, but the finish dried a little uneven. Did you know you can just pull these off with a putty knife? Super simple and makes for a much more clean look! We started by removing the logo in the top corner. ![]() ![]() To make this project super budget friendly, we went with this apartment size fridge in stainless steel. We went on a mad hunt trying to find something similar, but there’s not much in the way of matte black appliances that cost less than a car. When we started planning out our studio kitchen design we fell in love with the idea of this SMEG fridge, but not only is it unavailable in the US, it was way, way out of our budget. Last week we posted our studio kitchenette reveal and everyone had so many questions about our DIY black fridge with the brass pulls!! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |